|
The About Printer page shows
information about your Xerox printer:
Version
Information
Printer
Model - The model designation for your
printer (i.e, Phaser® 7300).
Printer
Serial Number - Unique number that can
be found on the Configuration Page. The
Configuration Page can be printed from the
Print
Config Page link.
Machine
Address - The printer's factory-assigned
hardware Ethernet (MAC) address.
Operating System
- Version information for the software installed
on your printer.
PDL
- Version information for the Page Description
Language (PDL) software installed on your
printer.
Networking - Version
information for the software installed on your printer.
Engine - Version
information for the software installed on your printer.
Memory
RAM - The base
configuration of the controller contains
SDRAM memory. The maximum SDRAM memory is
512 Mbytes. SDRAM memory added beyond this
limit will be ignored.
Slot 1, Slot 2 - There
are 2 option slots each supporting 32, 64,
128 or 256 Mbytes of SDRAM DIMMs. Any slot
may be used for SDRAM. These DIMMs must
comply with the 64-bit unbuffered PC-100
standard. The maximum SDRAM memory is 512
Mbytes. SDRAM memory added beyond this limit
will be ignored.
Page
Description Languages
Status and version of
the installed Page Description Language
(PDL) software.
Options
Installed
Hard Drive Installed/Size
- If a hard drive is installed, this
field defaults to YES and the Hard Drive
Size displays the size of the hard drive
in Megabytes (Mbytes).
Paper Handling
- Tray 2
- Tray 3
- Tray 4
- Tray 5
- Left Side Output Tray
Fonts
Installed - Shows the total number of
PostScript fonts installed in the printer.
|