You can choose to have a Startup Page print each time the printer is turned on or reset, or you can disable the Startup Page. There are three methods for enabling/disabling the Startup Page:

From PhaserLink software
Refer to the PhaserShare Networking Manual for information on using your World Wide Web browser to access the printer.

From utility files
Download one of the following files from the printer's CD-ROM or diskettes:

• Macintosh Use the Apple Printer Utility (refer to Using the Apple Printer Utility to download files for instructions).
• PC Use utility files STARTPG.PS (enables), NOSTRTPG.PS (disables); refer to Downloading files from a PC for downloading instructions.

From the printer's front panel

1. Press Menu; the printer displays the following message:

Help Pages <---- ----> Menu

2. Scroll to the following message:

Printer Defaults <---- ----> Menu

3. Press Menu.
4. Scroll to the following message:

Startup Page <---- ----> Menu

5. Press Menu.
6. Scroll to the following message:

Startup Page:Disabled <---- ----> OK

7. Press OK.
8. Press
until Ready appears.