Side 1

For a multi-page document, print odd-numbered pages for Side 1. (This selection is application-specific).

1. Insert paper with the side to be printed face-up. This example shows letterhead paper.
2. In the printer's front panel, select the media type at the prompt.

Front panel selection	Media type
Paper:	Standard laser paper 90 - 105 g/m2, 24 - 28 lb.
Coated Paper:	Xerox Glossy Coated paper
Card or Envelope:	Card stock
	Heavy laser paper 109 - 150 g/m2, 29 - 40 lb.

3. In the Print screen (using a supported driver), select Multi-Purpose Tray as the Paper Source or Tray Selection. Send the job to the printer.
4. Remove the printed paper from the output tray.

Two-sided printing on specialty media can shorten component life.

For best results with duplex printing, use 90 g/m2 (24 lb.) laser paper.

Side 2

For a multi-page document, print even-numbered pages for Side 2. (This selection is application-specific).

1. Insert the paper with the blank side face-up.
   
2. In the printer's front panel, select the media type at the prompt.

Front panel selection	Media type
Paper 2nd Side:	Standard laser paper 90 - 105 g/m2, 24 - 28 lb.
Coated Paper:	Xerox Glossy Coated paper
Card or Envelope:	Card stock
	Heavy laser paper 109 - 150 g/m2, 29 - 40 lb.

3. In the Print screen (using a supported driver), select Multi-Purpose Tray as the Paper Source or Tray Selection. Send the job to the printer.
4. Remove the printed paper from the output tray.