| Setting the IP address: PhaserLink Printer Management Software
|
|
After setting the printer's IP address by another method, you can perform the rest of the TCP/IP configuration using PhaserLink Printer Management Software, if you have a World Wide Web browser. For more information on PhaserLink Printer Management Software, see PhaserLink Printer Management Software.
-
Connect to the printer via PhaserLink (see Accessing the printer from a browser).
-
On the left side of any PhaserLink page, click
Settings.
-
In the
INTERFACES
group, click
TCP/IP.
-
Enter your printer's settings and click
Apply
at the bottom of the page.
-
The printer responds by displaying a dialog box that allows you to reset the printer. The changes will not take effect until the printer is reset.
|
| |
|
