| Disabling and enabling protocols: Phaser 750 front panel
|
-
When the front panel displays
Ready,
press the
Menu
button.
-
Press the right-arrow (
---->
) button until
Configuration
is displayed. Press the
Menu
button.
-
Press the right-arrow (
---->
) button until
Network Settings
is displayed. Press the
Menu
button.
-
Press the right-arrow (
---->
) button until the desired protocol is displayed (for DHCP/BOOTP, display TCP/IP at this point). Press the
Menu
button.
For HTTP, EtherTalk, TokenTalk, and IPP
|
-
Press the right-arrow (
---->
) button until
On
or
Off
is displayed.
-
Press the
Menu
button.
-
Press the right-arrow (
---->
) button until
Interface
is displayed. NOTE: For DHCP/BOOTP, display
DHCP/BOOTP
rather than
Interface.
Press the
Menu
button.
-
Press the right-arrow (
---->
) button until
On
or
Off
is displayed, depending on whether you want to enable or disable the protocol. Press the
OK
button.
-
To return the printer to normal operation, press the
Exit
button (the left-most button) until the front panel displays
Ready.
|
| |
|
