Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.
PhaserShare


Disabling protocols: Phaser 560 and Phaser 380 printers
  1. Press the Menu button; the front panel displays Help Pages.

    Note: When you are in the menu, if the front panel is not used for 5 minutes, the printer returns to the Ready state.
  2. Enter the Network Settings menu by pressing the right (---->) or left (<----) arrow buttons until the front panel displays Network Settings.

  3. Press the Menu button; the front panel displays TCP/IP.

  4. Disabling TCP/IP:

    1. Press the Menu button; the front panel displays Interface.

    2. Press the Menu button again to display the current status of the protocol: Interface:Enabled or Interface:Disabled. The current status is marked with an asterisk (*) in the upper-right corner of the display.

    3. Press the right arrow (---->) button until the front panel displays Interface:Disabled.

    4. Press the OK button to disable the protocol; the front panel briefly displays Selected, then it displays Interface.

    5. Press the Exit button to return to the TCP/IP display.

  5. Disabling EtherTalk: To return the printer to normal operation, go immediately to Step 8; to continue and disable the EtherTalk protocol, follow these steps:

    1. Press the right arrow (---->) button; the front panel displays EtherTalk.

    2. Press the Menu button; the front panel displays the current status of the protocol: EtherTalk:Enabled or EtherTalk:Disabled. The current status is marked with an asterisk (*) in the upper-right corner of the display.

    3. Press the right arrow (---->) button until the front panel displays EtherTalk:Disabled.

    4. Press the OK button to disable the protocol; the front panel briefly displays Selected, then it displays EtherTalk.

  6. Disabling NetWare: To return the printer to normal operation, go immediately to Step 8; to continue and disable the NetWare protocol, follow these steps:

    1. Press the right arrow (---->) button; the front panel displays NetWare.

    2. Press the Menu button again; the front panel displays Interface.

    3. Press the Menu button to display the current status of the protocol: Interface:Enabled or Interface:Disabled. The current status is marked with an asterisk (*) in the upper-right corner of the display.

    4. Press the right arrow (---->) button until the front panel displays Interface:Disabled.

    5. Press the OK button to disable the protocol; the front panel briefly displays Selected, then it displays Interface.

    6. Press the Exit button to return to the NetWare display.

  7. Disabling HTTP: To return the printer to normal operation, go immediately to Step 8; to continue and disable the HTTP protocol, follow these steps:

    1. Press the right arrow (---->) button; the front panel displays HTTP.

    2. Press the Menu button again; the front panel displays the current status of the protocol: HTTP:Enabled or HTTP:Disabled. The current status is marked with an asterisk (*) in the upper-right corner of the display.

    3. Press the right arrow (---->) button until the front panel displays HTTP:Disabled.

    4. Press the OK button to disable the protocol; the front panel briefly displays Selected, then it displays HTTP.

  8. To return the printer to normal operation, press the Exit button until the front panel displays Ready.

Return to Networking Topic List
Support Home Page
Network Printers Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program