PhaserShare

Parallel connection to Tektronix printers Sending PostScript utility files to the printer for configuration can be accomplished by using the printer's parallel port. If you use this method, you need the correct parallel cable or adapter. These are available from Tektronix: Parallel cable (part number 012-1468-00). 36-pin high-density plug to 25-pin DSUB plug; 3 meters (9.84 feet). Parallel adapter (part number 013-0299-00). Converts 36-pin low-density 1284-B plug to 36-pin high-density 1284-C plug. Return to Networking Topic List						Support Home Page Network Printers Support Home Additional Information Register your Printer ASPs & TPMs About Software Support Color Connection Printer Warranties Material Safety Data Sheets Supplies & Cartridge Recycling Program