|
Selecting the cleaning page source
|
|
The printer picks sheets of paper from a designated media tray as part of its self-maintenance and jam recovery routines. The default cleaning page source for the printer is the upper tray. When the Lower Paper Tray Assembly is installed, you can change the source of the cleaning page to the lower tray to prevent the printer from using transparencies or letterhead loaded in the upper paper tray.
You can change the cleaning page source through the front panel by following these steps:
- While the Ready message is displayed, press the Menu button. The printer displays the first item in the setup menu:
Help Pages
- <---- ----> Menu
- Using the left arrow (<----) or right arrow (---->) buttons, scroll through the selections until the following message appears:
Printer Defaults
- <---- ----> Menu
- Press the Menu button to access the printer defaults settings.
- Using the left arrow (<----) or right arrow (---->) buttons, scroll through the selections until the following message appears:
Cleaning Page Source
- <---- ----> Menu
- Press the Menu button to access the cleaning page source settings.
Cleaning Page Source:Upper
- <---- ----> OK
- Scroll through the settings until you reach the one you want. Press the OK button to confirm the setting.
- To return to the top level of the menu, press the Exit button until the printer displays the Ready message.
Printer Types | Topics
|
| |
|
