The links on this page apply to PhaserShare Network cards with firmware version 2.0.

To find out more about networking your printer, click on the links below. Some of the information is presented in Adobe Acrobat format (PDF). You will need the Acrobat Reader installed on your system to view these files.

Network printing with Tektronix Color Printers

• Network installation overview (7K PDF )

• How to tell which PhaserShare card is installed in your printer (14K PDF )

• How to tell which protocols are enabled in your printer (6K PDF )

• Your printer's configuration page (24K PDF )

• Your printer's network utilities diskettes (20K PDF )

• Parallel connection to Tektronix printers (7K PDF )

• Disabling protocols (7K PDF )

PhaserShare(TM) Ethernet card

• Introduction (10K PDF )

• Ethernet connections and indicators (9K PDF )

• Ethernet cables and termination (11K PDF )

PhaserShare(TM) Token Ring card

• Introduction (18K PDF )

• Token Ring connections and indicators (30K PDF )

• Ring Speed jumper (9K PDF )

• Token Ring configuration (38K PDF )

LocalTalk, EtherTalk, and TokenTalk configuration

• Before you begin (7K PDF )

• Using AppleTalk Phase 2 (5K PDF )

• Configuration overview (6K PDF )

• Print the configuration page (24K PDF )

• Finding your printer's name in the Chooser (11K PDF )

• Changing your printer's name (16K PDF )

• Changing your printer's EtherTalk/TokenTalk zone (17K PDF )

Novell NetWare configuration

• The PhaserShare NetWare interface (9K PDF )

• Before you begin (7K PDF )

• NetWare 3.x configuration: overview (11K PDF )

• NetWare 3.x configuration: Windows environments (59K PDF )

• NetWare 3.x configuration: DOS environments (125K PDF )

• NetWare 4.1 configuration: overview (12K PDF )

• NetWare 4.1 configuration: Windows environments (18K PDF )

• NetWare 4.1 configuration: DOS and other environments (19K PDF )

TCP/IP configuration

• Introduction (10K PDF )

• Before you begin (9K PDF )

• Installing files from the UNIX version of the network diskettes (12K PDF )

• Downloading files from the Tektronix Anonymous ftp Server (8K PDF )

• TCP/IP configuration overview (11K PDF )

• Printing the configuration page (24K PDF )

• Configuring your host (16K PDF )

• Configuring your printer (70K PDF )

• Troubleshooting (14K PDF )

• TCP/IP networks without UNIX hosts (12K PDF )

• Setting your printer's IP address using IPCONFIG.PS (154K PDF )

• Windows NT setup (9K PDF )

• OS/2 Warp and LAN Server setup (22K PDF )

• Tektronix PhaserPrint software for UNIX and VMS environments (11K PDF )

Details on UNIX host configuration for TCP/IP

• Using tip (18K PDF )

• Using cu (18K PDF )

• Spooling configuration for SPARCstation platform (12K PDF )

• Spooling configuration for SGI platform (12K PDF )

• Spooling configuration for DEC platform (12K PDF )

• Spooling configuration for HP platform (12K PDF )

• Spooling configuration for IBM RS/6000 platform (12K PDF )

• Sample spooler configuration for a typical BSD system (18K PDF )

RARP and BOOTP

• Enabling RARP (21K PDF )

• BOOTP (35K PDF )

PhaserLink