|
Parallel Configuration for SGI IRIX 5.3 and 6.x
|
IRIX 5.3 and IRIX 6.x with Impressario Client
The following procedure describes how to use the SGI Printer Manager program to configure a workstation running IRIX 5.3 and IRIX 6.x with Impressario Client to support a color PostScript printer.
- From the Toolchest, click System/Printer Manager, or type printers at the command line.
- Click on Printer and select Add from the pull-down menu.
In the box marked New Printer Name type the name of the print queue (this can be called anything).
For Connection Type, select Local.
Note: The fields Location Code and Location Description may contain information
describing the location of the printer, or they can be left blank.
In the box labeled Printer Type, select one of the Generic Postscript entries.
For Connection, click on Parallel.
- Click OK.
IRIX 6.x with Impressario Server
The following procedure describes how to use the SGI Printer Manager program to configure a workstation running IRIX 6.x with Impressario Server to support a color PostScript printer.
- From the Toolchest, click System/Printer Manager, or type printers at the command line.
- Click on Printer and select Add from the pull-down menu.
In the box marked New Printer Name type the name of the print queue (this can be called anything).
For Printer Connected To, select Local Host.
Note: The fields Location Code and Location Description may contain information
describing the location of the printer, or they can be left blank.
In the box labeled Printer Type, select one of the Generic Color Postscript entries.
For Printer is Attached to, click on Parallel.
- Click OK.
|
| |
|
