PhaserShare

Network installation overview Unpack and set up your printer. This must be done before attempting to configure the printer on a network. Printer setup includes installing ink or toner, loading paper trays, and turning on the printer. See your printer's user documentation for information about printer setup. PhaserShare Ethernet Card provides information about physically connecting the printer to an Ethernet network. PhaserShare Token Ring Card provides information about physically connecting the printer to a Token Ring network. PhaserShare LocalTalk/Serial Card provides information about physically connecting the printer to a LocalTalk network. Install the PhaserShare card in the printer. This is done at the factory when a PhaserShare card is purchased initially with your printer. When a PhaserShare card is purchased later as an upgrade kit, follow the instructions for installing the card in Installing PhaserShare Cards in Tektronix Printers. Configure the network protocols. Click on the following links for more information: For LocalTalk, EtherTalk, or TokenTalk: EtherTalk, LocalTalk, and TokenTalk Configuration For Novell Netware: Novell NetWare Configuration and PhaserShare Administrator Software for NetWare Networks For TCP/IP (UNIX, OS/2 Warp and LAN Server, and Windows NT: TCP/IP Configuration (UNIX), TCP/IP Configuration (OS/2 Warp/LAN Server), Windows NT, For NetWare installations only. Install the PhaserShare Status Monitor software on all platforms running Windows. For more information, see the PhaserShare Status Software User Manual.						Support Home Page Network Printers Support Home Additional Information Register your Printer ASPs & TPMs About Software Support Color Connection Printer Warranties Material Safety Data Sheets Supplies & Cartridge Recycling Program