---

Note: If you are attempting to perform any front panel procedures and you don't see the expected menu choices on the front panel display, the front panel may be locked. For information on how to unlock it, see Disabling protocols from the Phaser 600 front panel.

---

1. Press the Menu button; the front panel briefly displays Entering Menu, then displays Help Pages.

   ---

   Note: When you are in the menu, if the front panel is not used for 5 minutes, the printer returns to the Ready state.

   ---

2. Enter the Network Settings menu by pressing the right (---->) or left (<----) arrow buttons until the front panel displays Network Settings.

3. Press the Menu button; the front panel displays TCP/IP.

4. Press the right arrow button (---->) button until the front panel displays NetWare.

5. Press the Menu button; the front panel displays Interface.

6. Press the right arrow button (---->) button; the front panel displays Frame Type.

7. Press the Menu button; the front panel displays the first in a menu of frame types. The current setting is shown first; Adaptive is the default.

8. Press the right arrow button (---->) button until the frame type you want is displayed.

9. Press the OK button to enter your choice into the printer. The front panel briefly displays Selected, then returns to the Frame Type display.

10. To return the printer to normal operation, press the Exit button until the front panel displays Ready.