PhaserShare

Ring speed jumper The Token Ring card is equipped with a single two-pin jumper to set the ring speed. The settings are as follows: Jumper on: 4 Mbps Jumper off (factory default setting): 16 Mbps For information on setting the jumper, see Setting the ring-speed jumper on the Token Ring card. (If you received your printer with the Token Ring card already installed, you must remove the card before you change the jumper setting.)						Support Home Page Network Printers Support Home Additional Information Register your Printer ASPs & TPMs About Software Support Color Connection Printer Warranties Material Safety Data Sheets Supplies & Cartridge Recycling Program