Printers & Products
Software
Services
Solutions
Partners
Support
Printing ASCII files
Using a Tektronix driver
Using a non-Tektronix driver
If you are not using a supported driver, select color corrections through the printer's front panel or with downloadable utility files.
Printing ASCII files If you are printing ASCII files directly to the printer, you will need a port set up to accept PCL5 files; refer to Printing monochrome PCL5 files for instructions.
Using a Tektronix driver Many DOS applications include printer drivers for Tektronix printers. Check the application you are using for a printer driver for a Phaser 350 printer. Install and use the driver according to the application's documentation.
Using a non-Tektronix driver If the application you are using does not have a driver for a Phaser 350 printer, do one of the following:
If no Tektronix Phaser series printers are listed, try one of the following:
http://www.tektronix.xerox.com/
Use a generic color PostScript printer driver. However, generic drivers do not have information on the printer's page sizes and image areas, and images may be clipped or shifted when printed. Using a standard Letter- or A4-size media selection should produce acceptable results.
