|
The Email Server (SMTP) Settings
Page allows you to configure email server
settings and to specify a return email address.
To setup the MaiLinX Email Server,
select either Automatic (recommended) or
Manual identification for your SMTP email
server.
Use DNS to Identify SMTP Server (Automatic)
To identify the SMTP email server
automatically, click the radio button next
to Use DNS to Identify SMTP Server (Automatic). Enter the Primary and Secondary
Name Server IP Addresses, using the 4-byte
IP address of the email server. Contact
your network system administrator for the
correct address of the DNS server.
- Primary
Name Server IP Address
- Secondary
Name Server IP Address
SMTP Server
Name or IP Address
To specify the SMTP email server
manually, click the radio button next to
SMTP Server Name or IP Address and
enter the information for the email server.
Set the 4-byte IP address of the SMTP email
server to send alert notifications. If there
is no DNS Server, then only the IP Address
will be allowed. Contact your network system
administrator for the correct address of
the SMTP server.
Return
Email (optional)
Enter an email address for returned
email. This must be an actual email account
for the System Administrator. The address
can be a maximum length of 79 characters.
When you have finished, click
Save Changes to save your settings
and continue, or click Discard Changes
to abort the process.
|