|
Parallel
Port Settings
Parallel Port
- Allows you to enable
and disable the interface.
Page Description Language
- Select the language you
want the printer to receive on the Parallel
port. If you select AutoSelect, the printer
automatically senses the language of the
print job and processes it accordingly.
Encoding - Select
Normal, Raw, Binary, or TBCP. If you change
the settings here, you may need to also
change the settings in the printer driver,
as the settings must be the same in both
the printer and the printer driver.
Job Pipelining:
- On - The printer can
begin processing a new job on this port
while it is still printing a previous
job.
- Off - The printer
does not begin a new job on this port
until the current job is completed.
USB
Port Settings
USB Port
- Allows you to enable
and disable the interface.
Page Description Language
- Select the language you
want the printer to receive on the USB port.
If you select AutoSelect, the printer
automatically detects the language of the
print job and processes it accordingly.
Encoding
- Select Normal, Raw, Binary,
or TBCP. If you change the settings
here, you may need to also change the settings
in the printer driver; the the settings
must be the same in both the printer and
the printer driver.
Job Pipelining:
- On - The printer
can begin processing a new job on this
port while it is still printing a previous
job.
- Off - The printer
does not begin a new job on this port
until the current job is completed. This
is the recommended setting to avoid errors
in the job accounting log.
Ethernet
Interface Settings
Speed -
Speed setting for
Ethernet communication:
- Automatic
(default setting)
- 100
Mbps (Full Duplex)
- 100
Mbps (Half Duplex)
-
10 Mbps (Full Duplex)
- 10
Mbps (Half Duplex
Actual Speed -
Actual speed of Ethernet communication.
Machine
Address (MAC address) -
The printer's factory-assigned hardware
Ethernet (MAC) address.
Connector - The
Ethernet connector type used, i.e., RJ45.
|