|
Xerox provides tools for NetWare
printer and queue management that are more
automated and comprehensive than CentreWare
IS. You can obtain information on these
tools from the Xerox web site. You can use
this page to configure the printer for operation
on NetWare networks.
NetWare
- Allows you to enable and disable the
protocol.
Status
Message - Displays current NetWare printer
status.
Connection
Mode - Select Directory Services,
Bindery, or Bindery and Directory
Services.
Print
Server Name - Contains the current name
for the print server. To change the name,
enter a valid NetWare print server name.
The new name takes effect the next time
the print server or printer is reset. The
Print Server Name must be 63 characters
or less. The combination of Print Server
Name and DS Context must be 510 characters
or less.
Queue
Scan Interval - Use this field to change
the interval at which the printer polls
for jobs. The value entered must be between
1 and 3600 seconds. The default is 15 seconds.
Banners
- ON - Banner pages print with
each job.
- OFF - Banner pages will not
print.
Banner pages print if banners
are set to ON at the file server,
even if banners are set to OFF in
the printer.
Page
Description Language - Select the language
you want the printer to receive on the print
server port. If you choose AutoSelect,
the printer automatically detects the language
of the print job and processes it accordingly.
Filtering
- Allows you to choose whether the printer
filters out control characters. In most
cases, Filtering should be set to None.
Job
Pipelining
- ON - The printer begins processing
a new job on this port while it is still
printing a previous job.
- OFF- The printer cannot begin
a new job on this port until the current
job is completed.
NDS
Tree - Contains the NetWare Directory
Services Tree that the printer looks for
when connecting to file servers on the network.
The DS Tree must be entered into this field
if the printer is in NDS mode. The maximum
length is 47 characters. This field is available
only when Directory Services is selected,
and is not displayed if Connection Mode
is set to Bindery.
NDS
Context - Contains the NetWare Directory
Services Context that the printer looks
into when connecting to file servers on
the network. The combination of Print Server
Name and DS Context must be 510 characters
or less. This field is available only when
Directory Services or both is selected,
and is not displayed if Connection Mode
is set to Bindery.
Login
Password - Use the field to specify
a password to use when logging in to the
file server. The maximum length for the
password is 47 characters.
Frame
Types
You can enable any and all frame
types, but at least one must be enabled.
The Network Number field reports the last
power-up value of the Network Number bound
to that frame type. If a frame type is disabled
at power-up, the Network Number is displays
as Not Bound.
Frame
Ethernet 802.2 - IEEE packet type with
MAC header followed by 802.2 LLC header.
Frame
Ethernet 802.3 - Early Novell NetWare
packet type.
Frame
Ethernet SNAP - IEEE packet type with
MAC header followed by 802.2 LLC header
and SNAP header.
Frame
Ethernet II - DEC/Intel/Xerox Specification
Version 2 packet type.
|