You can set the printer's IP address by any of the following methods:

• Front panel. See Setting the IP address from the Phaser 750 front panel.
• DHCP. When turned on or reset, the printer receives its IP address information from a DHCP server. See Setting the IP address: DHCP.
• Downloaded configuration file. Can be used on hosts that do not have BOOTP, or DHCP. For UNIX, use a Xerox-provided shell script to prepare a configuration file. Sending the file to the printer stores the IP address information in the printer's memory, where the printer reads it when reset. See the
PhaserShare Networking Manual.

• PC and Macintosh users can also set IP parameters using PostScript utility files; see the README files on the printer's CD-ROM. The PC README file is in the UTILS directory; the Macintosh README file is in the Network Utilities folder.
• PhaserLink Printer Management Software. After setting the printer's IP address by another method, you can perform the rest of the TCP/IP configuration using PhaserLink Printer Management Software, if you have a World Wide Web browser. See Setting the IP address: PhaserLink Printer Management Software.