The About Printer page shows
information for your Xerox printer:
 |
Version
Information
|
Printer
Model
The model
designation for your
printer (i.e.: Phaser 860).
Serial Number
Unique number that can be found
on the Configuration Page. The Configuration Page
can be printed from the Print
Config Page link.
Machine Address
The
printer's factory-assigned
hardware Ethernet
(MAC) address.
Operating System
PostScript
Networking
Engine
Version information for the
software installed in your printer.
|
Memory
|
RAM
The
base configuration of the controller contains SDRAM
memory. The maximum SDRAM memory is 512 MBytes. SDRAM memory
added beyond this limit will be ignored.
Slot 0, Slot 1
There
are 2 option slots each supporting 32, 64, 128 or
256 MBytes of SDRAM DIMMs. Any slot may be used
for SDRAM. These DIMMs must comply with the 64-bit
unbuffered PC-100 standard. The maximum SDRAM memory is 512 MBytes. SDRAM memory
added beyond this limit will be ignored.
|
Page
Description Languages
|
Status
and version of the installed Page Description Language (PDL) software.
|
Options
Installed
|
Hard
Disk Installed
Status of the hard
disk drive, "Yes"
- installed, "No"
- not installed. The
hard
disk stores printer
information and CentreWare
content that can be
accessed
by other Xerox printers
on the network.
Hard Disk Size
Total
storage size of the hard drive, shown in
megabytes (Mb).
Token Ring Card
Status
of the Token Ring Card, "Yes" - installed, "No"
- not installed. Install if printer is to be used
on a Token Ring network.
Middle Tray
Indicates if a middle paper tray is installed
in your printer.
Lower Tray
Indicates if a lower paper tray is installed
in your printer.
PostScript
Fonts Installed
Shows the total number
of PostScript fonts
installed in the printer.
|
|