|
About Printer Help
The
About Printer page shows information about your Xerox printer:
Version Information
Printer Model - The printer model configuration displays in this field. The
Phaser 6250 printer supports the following five configurations:
-
Phaser 6250B - The
6250B configuration contains
128 MB memory standard and a standard
500-sheet tray.
-
Phaser 6250N - The
6250N networking configuration contains
256 MB memory and a standard
500-sheet tray.
-
Phaser 6250DP - The
6250DP configuration contains
256 MB memory standard and supports 2-sided printing with the optional hard drive added.
-
Phaser 6250DT - The
6250DT configuration contains
256 MB memory standard, a second
500-sheet feeder tray, and supports 2-sided printing with the optinal hard drive added.
-
Phaser 6250DX - The
6250DX configuration contains standard
512 MB memory, a hard drive, two
500-sheet feeder trays, and supports 2-sided printing.
Note: Each printer configuration contains an upgradeable
Configuration Chip which defines, enables, or disables certain printer characteristics, such as networking,
Job Pipelining, or 2-sided printing. For features such as
Job Pipelining,
2-Sided Printing, and
PDF printing, a hard drive is required.
Printer Serial Number - The
Printer Serial Number is a unique number that can be found on the
Configuration Page.
Machine Address - The printer's factory-assigned hardware
Ethernet (MAC) address.
Operating System - Version information for the software installed on your printer.
PDL - Version information for the
Page Description Language (PDL) software installed on your printer.
Networking - Version information for the networking software installed on your printer.
Engine - Version information for the engine software installed on your printer.
Memory
RAM Size - The base configuration of the controller contains
SDRAM memory. The maximum
SDRAM memory is
512 MB.
SDRAM memory added beyond this limit will be ignored.
Slot 1, Slot 2 - There are
2 option slots each supporting
128 or
256 MB of
SDRAM DIMMs. Any slot may be used for
SDRAM. These DIMMs must comply with the
64-bit unbuffered
PC-100 standard. The maximum
SDRAM memory is
512 MB for any of the printer configurations.
SDRAM memory added beyond this limit will be ignored.
Page Description Languages
Status and version of the installed PDL software.
Options Installed
-
Hard Drive Installed - If the printer has a hard drive installed, this value displays
Yes. The hard drive is optional on the
6250N,
6250DP,
6250DT, and is standard on the
6250DX configurations.
-
Hard Drive Size - If a hard drive is installed, the size of the hard drive displays. If no hard drive is installed, this field will not display.
-
Tray 3 - If Tray 3 is installed, this field displays
Yes.
-
Tray 4 - If Tray 4 is installed, this field displays
Yes.
-
2-Sided Printing - If 2-sided printing is enabled, this field displays
Yes. Only the
6250DP, 6250DT, and
6250DX configurations of this printer can enable 2-sided printing.
Fonts Installed - Shows the total number of
PostScript fonts installed in the printer. You can delete fonts by clicking the
Properties tab
> Web Server > Font Files from the navigation tree in
CentreWare IS and selecting the fonts you want to delete.
|
