Clone
Printer Help
You can clone selected settings from a
Source Printer to a
Destination Printer on the same network using the
Clone Printer page. If you want to clone the selected settings to to a destination printer in a different domain or zone than the source printer, enter the Zone and Domain information in the fields below
Optional Settings.
Cloning Settings from One Printer to Another:
Select the parameters to be cloned from the Source Printer. You can choose any combination of the following settings or you can select all by clicking
Check All:
Source Printer Settings
- NetWare
- Usage Profile Properties
- FTP
- EtherTalk
- Information Forwarding
- E-Supplies
- Parallel Port
- Remote Printing
- Warm Up
- Security
- Date and Time
|
- SNMP
- TCP/IP
- Email Server
- Mail Alerts
- USB
- PostScript
- Printer Defaults
- LPR
- IPP
- Port 9100
|
Enter
IP Address or
DNS Name of the
Destination Printer. If you enter a
DNS Name, DNS must be configured on the
TCP/IP page.
Optional Settings
You may assign a
Printer Name (SNMP System Name) to the
Destination Printer by entering this name in the
Printer Name (SNMP System Name) field.
Modify the
EtherTalk Zone and/or
IP Domain Name settings if the
Destination Printer will be located in a different Domain / Zone.
Note:
EtherTalk Zone and/or
IP Domain Name settings will be cloned only if the
EtherTalk and/or
TCP/IP settings are selected to be cloned above.
Confirm Cloning Settings
When you click
Clone Selected Settings, the
Confirm Cloning Settings page displays containing your selections. If you are satisfied with the list of settings to clone, Click
Clone to continue, otherwise click
Cancel.
|